Pacific West Steel - Trims and Accessories

Trims and Accessories

Gable Trim Application
Apply gable trim to both roof sheeting ends. Fasten at top and sides as shown at intervals of 24" o.c.

Ridge Cap Application
Apply ridge cap as shown, fastening through cap and roofing at every rib. If using formed ridge cap be certain to align sheets properly.

Endwall Application
Secure upstanding leg to wall by fastening at 24" intervals. Then fasten through lower leg near edge of flashing on every rib.

Vented Ridge Application
Apply C-Metal to end of roof panels and secure by fastening at 24" o.c. Insert Closures and caulk. Install screen (by others). Then apply vented Ridge cap as shown, fastening through cap and roofing at every rib.

Masterflash Application - Flexible On-Site Customization
Trim steps images

Step One
TRIM

Step Two
SLIDE

Step Three
SEAL

Step Four
FORM

Step Five
FASTEN

HOME : : Trims and Accessories : : Frequently Asked Questions : : Colors
Care and Maintenance : : Installation Tips : : Request Information : : Email

Pacific West Steel, Inc.
Post Office Box 3858
Paso Robles, CA 93447
(805) 238-1783
Fax (805) 238-9424

Site modified by: @ C R E A T i V E