Our High-Quality Products

GABLE TRIM APPLICATION

Apply gable trim to both roof sheeting ends. Fasten at the top and sides as shown at intervals of 24" o.c.

RIDGE CAP APPLICATION

Apply the ridge cap as shown, fastening through the cap and roofing at every rib. If using a formed ridge cap, be sure to align the sheets properly.

ENDWALL APPLICATION

Secure the upstanding leg to the wall by fastening it at 24" intervals. Then fasten through the lower leg near the edge of the flashing on every rib.

VENTED RIDGE APPLICATION

Apply C-Metal to the end of roof panels and secure by fastening at 24" o.c. Insert Closures and caulk. Install screen (by others). Then apply the vented ridge cap as shown, fastening through the cap and roofing at every rib.